ShoreDocker Do-It-Yourself Boat Ramp Kits is the simple, cost-effective way to dock your boat or Jet Ski.

The basic kit is designed to accommodate watercraft with a loaded weight of up to 1200 lbs. and up to 20 ft. in length. Keeps your boat high and dry and out of the water.

Kit includes:

Eight - polyurethane rollers with stainless steel axle bolts and locknuts.

16 - galvanized roller brackets (bolt onto dimensional treated lumber).

Six - galvanized strengthening side braces for a strong connection between "rail" beams and cross members.

Two - Hot-dipped galvanized axle brackets (Bolt onto dimensional treated lumber).

One - 1100 lbs. (dead pulling weight) winch with post bracing & 30 ft. strap with hook.

Complete guide to your ramp including suggestions for adding additional sections and supporting the ramp with blocking or legs.

ShoreDocker SD-1200 hardware sold separately.

Lumber sold separately.

Rollers are non-marking thermoplastic rubber with the proper hardness to protect the finish on your watercraft and provide ease of winching up onto the ramp.

All hardware brackets and fasteners are hot-dipped galvanized for superior corrosion resistance.

This item generally ships standard Ground via USPS, UPS, or FedEx.

Product Number: SD-1200

UPC: 724785912005

ShoreDocker SD-1200 Hardware Sold Separately (HK-1200)

Or you will need to purchase the following:

• 8 - Stainless Steel Nylock Nut - 3/8”
• 8 - SS Hex Bolt - 3/8 x 2 1/2"
• 30 - Deck Screws - 2 1/2" - 3"
• 1 - Galv Carriage Bolt - 1/2" x 8" + nut and washer
• 37 - Galv Nuts - 3/8"
• 2 - Galv 3/8" Flat Washers
• 37 - Galv Split Washers - 3/8"
• 14 - Galv Carriage Bolts - 3/8" 2 1/2"
• 16 - Galv Hex Bolts - 3/8" x 2 1/2"
• 1 - Galv Hex Bolts - 3/8" x 4 1/2"
• 2- Galv Carriage Bolts - 3/8" x 4 1/2"
• Pressure-treated lumber not included.

Other Accessories Available:

• RS-1200 Extra Boat Ramp Rollers
• WSB Extra Side Braces
• SD-1200 Hardware